As drivers we all have to do our part to help reduce emissions and reduce our dependence on foreign oil, and one way to do that of course is with flex fuel vehicles, but for some of you who are trying to do your part, you’re being taken!  There are people out there who are selling kits, especially on the Internet, who say these kits will convert your non flex-fuel vehicle into a flex-fuel vehicle, and they’ll do it very economically.  Well don’t believe it.  Our friends at General Motors have supplied us with the things that are different on a flex-fuel vehicle than they are on a non flex-fuel.

Beginning right at the beginning, where you put the fuel in all of this stuff is different.  The hoses are different, the wiring connections are different, there’s a flame arrestor, there’s an anti-siphon valve, all kinds of things that have to be changed to make this system work.

But it gets worse. The fuel pump, the capsule assembly, the fuel gauge, all of these things inside the tank are different, so you have to change that.  Even the tank itself, if it happens to be steel and a product called Turn Metal, will have problems if you use E-85.

Then under the hood of the car, the fuel rail itself that distributes the fuel to the fuel injectors has to be stainless steel.  The injectors have to be changed, they have to be bigger and they have to be made of a different material.

Then the computer that controls the injectors has to be different, has to be able to operate and control things relative to gasoline or E-85. 

How does it know? Well, it knows by this fuel identifier that has to be installed in the system. It tells the computer which program to use based on the fuel that’s moving through it.

So, if you think that’s all, no, there’s more coming up.  See buried way deep in the engine; valves, intake and exhaust valves and valve seats. We have valves here, we have valve seats, you can see them in the cylinder head.  They are different; they are made of a metal that doesn’t erode when you use ethanol.  So you’re looking at a major operation right there: the cylinder heads have to be replaced.

All of this makes it absolutely impractical to convert a non flex-fuel vehicle into a flex-fuel vehicle.  Save your money, drive more gently and you will be doing your part.


If you have a question or comment, write to me.
The address is MotorWeek, Owings Mills, MD, 21117.